This Mid-Century Modern writing desk is made from solid walnut. The desk is 48” wide, 24” deep, and 34” tall (the writing surface is 28” off the ground). This desk has it all: carving, turning, splays, tapers, through mortise and tenons, half blind dovetails, through dovetails, mitered dovetails, shop sawn veneer, and a sumptuous hand rubbed oil finish.

This desk won the award for Best Contemporary Style at the 24th Annual Texas Furniture Makers Show in Kerrville, TX. The annual show is held in the fall at the Kerr Arts and Cultural Center.

Price guide: $8,000

This Mid-Century Modern inspired bookcase is made entirely from hardwood. This particular one is made from rift sawn white oak to yield the straightest grain possible. It has miters at the four corners, a solid wood back, and a mortise and tenoned base. The legs are tapered and splayed, making for some head scratching joinery!

This bookcase won “BEST CONTEMPORARY” at the 2022 Texas Furniture Makers Show.

Rift sawn white oak.

48.5” wide, 14” deep, 26” tall

Price guide: $3,300

This writing desk is constructed of rift sawn white oak hardwood. The base features tapered legs. The three dovetailed drawers are piston fit into their openings. The slender drawers accommodate the client’s long legs.

58” wide, 30” deep, 31” high.

Stain and Water Based Polyurethane

Price guide: $5,000

This Mid-Century Modern desk is constructed of solid walnut. The top has graceful curves and rounded edges. The base features turned tapered legs and aprons with through tenons. The cabinet is solid walnut dovetailed at all four corners. The cabinet has two maple dovetailed drawers that ride on full-extension soft-closing under mount slides. The drawer bottoms and case back are veneered panels of birds eye maple.

This piece was featured in the Readers Gallery of Fine Woodworking Magazine.

30" tall x 73" wide x 48" deep

Finished with a hand rubbed oil and urethane blend.

Price guide: $6,500

This writing desk has a top constructed of shop sawn walnut veneers with graceful curves at the front and sides. The base features tapered legs, bent laminated aprons, a frame and panel bottom, and three maple dovetailed drawers piston fit into their openings.

This Writing desk won Third Place and the Woodcraft Sponsor's Award at the 15th Annual Texas Furniture Makers Show. This piece was also featured in Fine Woodworking Magazine.

30" tall x 66" wide x 32" deep

Finished with a hand rubbed oil and varnish blend on the outside and shellac and wax inside.

Price guide: $6,000

This credenza is made of a mix of solid and veneered walnut, featuring front and end panels of highly figured walnut burl veneer. The Roberts Credenza is deceptively complex since graceful curves at the front and side dictate that drawer fronts and doors also have to be curved. The sides and front components are made of layers of bending plywood and veneer bent against two separate forms. The hand-cut dovetailed file drawers ride on full-extension, soft-closing slides, and the doors are hung with brass knife hinges. Both the drawers and doors make use of push-to-open hardware to keep the front lines clean.

This piece won Second Place overall at the 2017 Texas Furniture Makers Show at the Kerr Arts and Cultural Center in Kerrville Texas.

62" wide, 27" deep, and 36" tall

Walnut burl veneer, quarter-sawn walnut veneer, maple, mdf

Finished with shellac and wax.

Price guide: $18,000

This board room furniture was made for a local school district. There was some existing cabinetry in the room that these desks were made to match. The project consisted of three desks that when combined make a semi circle, two rectangular desks, and a lectern. The desks have frame and panel sides and are made of solid cherry.  The project was finished to match the existing cabinets.

Curved desks: 72" long, 36" wide, and 28" high
Rectangular desks: 66" long, 30" wide, 28" high

Price guide:  $15,000

This Shaker style workbench works perfectly in a craft room or other work space. It has five wide drawers formatted to fit large sheets of art paper and three narrower drawers to hold other art supplies. All the drawers feature hand cut dovetails. The base and top are made from thick solid wood. This is a workbench made to last a lifetime.

Sized to suit your space.

Cherry case and maple top.

Finished with linseed oil and wax on exterior, shellac and wax on interior.

Price guide: $5,500

A classic bookcase. Hardwood and furniture grade plywood construction. Four of the five shelves adjust to accommodate books and items of various heights. Every home needs at least one of these!

80" tall x 36" wide x 12" deep

Price guide $1,500

These solid mesquite bookcases feature through dovetail joinery at the top corners, mitered bases, adjustable shelves, and ship-lapped hardwood backs.

48" tall x 30" wide x 12" deep

Hand rubbed oil and urethane finish.

Price guide: $3,300 each

This Mid-Century Modern bookcase features a dovetailed cabinet with figured cherry doors. The doors are hung using knife hinges. The knobs are hand turned and connected to the doors with through wedged mortise and tenons. The sides of the bookcase are a tapered framework with exposed joinery.

72" tall x 32" wide x 18" deep

Hand rubbed linseed oil finish

Price guide: $4,000

This hardwood bookcase is made from alder and features a frame and panel back, a dovetailed base, applied moldings, and three adjustable shelves. This case can be built any size up to 36" in width and eight feet or more in height. This bookcase is truly an heirloom, constructed entirely of solid wood.

54" tall x 30.5" wide x 13" deep

Hand rubbed oil finish.

Price guide:  $3,000